Brizo Baliza 68405-LHP Guia De Inicio Rapido

Válvula de tres manijas para el bidé de boquilla rociadora con rompedor de vacío y ensamble del desagüe automático

Publicidad

Enlaces rápidos

U P
®
C
®
ASME A112.18.1 / CSA B125.1
Models/Modelos/Modèles
68405-LHP
Baliza
Series/Serias/Seria
®
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
THREE HANDLE ROSETTE BIDET VALVE WITH
VACUUM BREAKER AND POP-UP ASSEMBLY
VÁLVULA DE TRES MANIJAS PARA EL BIDÉ DE
BOQUILLA ROCIADORA CON ROMPEDOR DE
VACÍO Y ENSAMBLE DEL DESAGÜE AUTOMÁTICO
ROBINET À TROIS POIGNÉES POUR BIDET AVEC
AJUTAGE, CASSE-VIDE ET RENVOI MÉCANIQUE
®
®
1
T E FLO N
L
N
O
T
L
F
E
3/32" (2.38mm)
3/32 po (2.38mm)
3/32" (2.38mm)
3/32 po (2.38mm)
10/8/09
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Brizo Baliza 68405-LHP

  • Página 1 Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N 3/32" (2.38mm) 3/32 po (2.38mm) For easy installation of your Brizo ® faucet you will need: • To READ ALL the instructions completely before beginning.
  • Página 2: Cleaning And Care

    This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.
  • Página 3 RP48447▲ Diverter Handle & Set Screw Manija Desviadora y Tornillo de Ajuste Manette d’inverseur et vis de calage RP62786▲ RP48448▲ Lift Rod Diverter Body Barra de Alzar Cuerpo Desviador Tirette Corps d’inverseur RP24▲ Rod Guide Assembly (Complete) Ensamble de la Barra de Guía Guide-Tirette (Complet) RP48449 Diverter Valve / Vacuum...
  • Página 4: Mantenimiento

    HL505▲ HX505▲ MAINTENANCE Bidet leaks from Rosette Spray: SHUT OFF WATER SUPPLIES. Replace Seats & Springs (1).* If leak persists: ▲Specify Finish / Especifíque el Acabado / Précisez le Fini SHUT OFF WATER SUPPLIES. Replace Stem Unit Assembly (2).* If Bidet exhibits very low flow: SHUT OFF WATER SUPPLIES.
  • Página 5 INSTALLATION OF DIVERTER VALVE/VACUUM BREAKER Note: Please refer to bidet bowl installation instructions to identify hole location for diverter valve. Hole size must be 1-1/8” diameter minimum. INSTALLATION OF ROSETTE SPRAY Assemble diverter valve (1) with “Y” and gasket (2) as shown in illustration. Slide one rubber cone Apply silicone bead (1) under rosette (2).
  • Página 6 1/2" (12.7 mm) INSTALLATION OF VALVE ASSEMBLIES Remove base (1) and gasket (2) from cold end valve assembly (3). MAKE CONNECTIONS TO WATER LINES: Choose hook-ups for 1/2" I.P.S. connections: Place assembly (1) through proper mounting hole from bottom. Reinstall gasket (1) Ball nose riser (3/8"...
  • Página 7: Renvoi Mécanique En Métal

    Step 3b METAL POP-UP Step 3c Remove stopper (1) and flange (2). Apply silicone to underside of flange (1). Insert Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non- body (2) into sink. Screw flange (1) into body (2). removable (5).
  • Página 8: Instrucciones Para Su Funcionamiento

    FLUSH YOUR SYSTEM Turn diverter handle (1) clockwise to ‘rim feed’ position. Turn on water supplies (2) and turn hot and cold handles (3) to open position for one minute to flush any debris from system. Check all connections at arrows for leaks. Re-tighten if necessary, but do not overtighten. OPERATING INSTRUCTIONS Install handles onto end valves.

Tabla de contenido