Customizing Your Vision 4 Lite - DragonTouch Vision 4 LITE Manual Del Usuario

GENERAL SETTING MODE
Press Mode button several times to switch to General Setting Mode.
General Setting
Volume
1/3
Exposure
SYSTEM SETTING MODE
Press Mode button several times to switch to System Setting Mode.
System Setting
Language
1/4 Car Mode
Power Off
09
10
Beep On
0
English
Off
3 Min.

CUSTOMIZING YOUR VISION 4 LITE

VIDEO SETTING
1. Video Resolution: 4K/30FPS, EIS 4K/30FPS, 2.7K/30FPS, 1080P/60FPS, 1080P/30FPS,
720P/120FPS
Default setting is 4K/30FPS.
Note: When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. EIS: On / Off
Default setting is off.
This setting adjusts the footage to offset for motion during capture. The result is smoother
footage, especially in activities with relatively small but fast motion including cycling,
motorcycling, and handheld uses.
Note: ① If you turn on EIS, then select 4K/30FPS, EIS will be turned off automatically.
② If you select 4K/30FPS, then turn on EIS, the video resolution will be EIS 4K/30FPS
automatically.
3. Loop Recording: Off / 1 Min. / 3 Min. / 5 Min.
Default setting is off.
Loop recording allows your camera to overwrite old files with new files. Once the memory
card becomes full, the camera will delete the first video file to make room for the latest
file. For example, if the setting for loop recording is "1 Minute", then the camera will create
video clips of 1 minute in length, and a 1-minute clip will be deleted when the camera
needs more memory.
4. Time Lapse Video: Off / 1 Sec. / 5 Sec. / 10 Sec. / 30 Sec. / 60 Sec.
Default setting is off.
Time Lapse Video creates video from frames captured at specific intervals. This option lets
you capture a time lapse event and immediately view or share it as a video. Time Lapse
Video is captured without audio.
10