Customizing Your Vision 4 Lite; Video Settings - DragonTouch Vision 4 Lite Manual Del Usuario

EN
Burst Photo Mode
In burst mode, several photographs are captured in quick succession, so it is perfect
for capturing fast-moving activities.
Self-Timer Mode
Self-Timer Mode gives a delay between pressing the shutter release and the
shutter's firing.

CUSTOMIZING YOUR VISION 4 LITE

Press and hold the OK button, choose the Setting icon to enter Setting Menu.
Press the Mode button to choose video setting, photo setting or system setting.
Press the Up or Down button to scroll through the options. Press OK to confirm and
press the Mode button to exit.

Video Settings

Resolution: 4K30fps/2.7K30fps/1080P60fps/1080P30fps/720P120fps/720P60fps/
720P30fps
Default setting is 4K30fps.
Note:
1. When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. After turning on EIS (anti-shake), the video resolution of the recorded video will
automatically switch to 3200*1800 when the video resolution you set is 4K30fps.
EIS: Off/On
Default setting is On.
This setting adjusts the footage to offset for motion during capture. The result is
smoother footage, especially in relatively small but fast motion activities, including
cycling, motorcycling, and handheld uses.
Distortion Correction: On/Off
Default setting is On.
When the Distortion Calibration is on, it can correct the image distortion.
Note: 4K30fps resolution doesn't support Distortion Correction.
7