Oase FM-Master WLAN EGC Instrucciones Breves página 16

- EN -
Commissioning/start-up
The unit is operated via the "Oase FM-Master" app on your smartphone or tablet. Proceed as follows for starting up:
 Install the "OASE-FM-Master" app. (→ Installing the APP)
 Connect the FM-Master WLAN to the power supply.
 Establish the WLAN connection.
The smartphone/tablet can connect to the FM-Master WLAN in two ways:
 Smartphone/tablet and FM-Master WLAN are connected via an available WLAN router. (→ Establishing a connection
via WLAN router)
 Smartphone/tablet and FM-Master WLAN are directly connected via WLAN. (→ Establishing a direct WLAN connec-
tion)
N O T E
The LED on the FM-Master WLAN indicates the current operating status. (→ Operating status display
)
Operating status display
 A
The LED indicates the operating status of the FM-Master WLAN.
LED colour LED status
– Off
Green Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Yellow Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Red Flashing
Installing the APP
iOS Android
16
Description
The FM-Master WLAN is switched off.
FM-Master WLAN is operational or connected to the smartphone/tablet via access point mode.
WPS is activated, FM-Master WLAN is waiting for the router access data.
FM-Master WLAN is connected to the smartphone/tablet via the router.
The FM-Master WLAN is starting up.
The FM-Master WLAN is in firmware update mode.
FM-Master WLAN is searching for a connection to the router.
Malfunction
Remedy:
 Disconnect from the power supply. Wait for 10 seconds then reconnect.
 Reset the FM-Master WLAN to the factory default settings
 Carry out a firmware update
How to proceed::
Open Google Play or App Store.
Search for the "Oase FM-Master" app and install.
Follow the instructions during installation.
Confirm the query "access to internal data of the unit".
If access is permitted, individual product photos for identification of the sockets can
be created.
The query appears during installation (Android) or when executing the app ((iOS).
The app appears on the display after successful installation.