Adaptive Intelligent Recovery - Honeywell Home T6 Pro Hydronic Guia Del Usuario

Setting degrees Fahrenheit (F) or Celcius (C)
1 Press Menu.
2 Press or to go to F / C. Press Select.
3 Press or to select F or C. Then press
Select.
4 Press Home to return to the home screen.
Adjusting keypad lockout
1 Press Menu on the thermostat.
2 Press or to go to LOCK. Press Select.
to go to OFF, PART, or ON, and then press Select.
3 Press or
OFF: Unlocked, and full access allowed.
PART: Partial lockout, allowing only the temperature to be changed.
ON: No access allowed.
4 To unlock the keypad, press the CENTER button and then enter the password
"1234". To enter the password, press
number. Then press Select. Repeat this process to enter the second through
fourth digits of the number. Once all four numbers have been entered, press
Select again.
5 This will unlock the keypad.
6 If the code is incorrect, the screen will flash the lines "--".
7 Press Back to go back a step to enter the correct number and press Select.

Adaptive Intelligent Recovery

Over time, the Honeywell T6 Pro Thermostat "learns" how long it takes your
system to reach the temperature you want. It turns on the heating system earlier
to make sure you're comfortable at the time you expect.
or to change the first digit of the
7