Operation On Battery - MGE UPS Systems Pulsar ES 5+ Manual De Instrucciones

operation on battery

without utility power
break in utility power
0 mn
1a
1d
to off
1e
flashing
1 beep every 10 s
your protected device is
supported by the battery
return of utility power
At whatever point the utility power
returns, Pulsar switches to normal
operation:
1a to 1c off
1d on: battery recharging
1e on
silence
your protected device is supported
by the utility power
Button 2 is to disable or enable the audio
warning device when operating on battery.
MGE UPS SYSTEMS
low battery warning
x mn
1a
1d
to off
1e
flashing
1 beep every 3 s
you have less than 20% autonomy
remaining: exit your protected
device because Pulsar will soon
switch off automatically
Button 2 is to deactivate or activate the
energy saving function as follows:
button
2
Pulsar ES 5+: E-51032513XT/AC
Pulsar switches off
automatically
ε
x + mn
1a
1e
to off
silence
UPS output off
3 pushes
at 1s gaps
1 beep:
energy
saving
5s
activated
2 beeps:
no energy
saving
if Pulsar is operating off
load: device switches off (*)
5 mn
1a
1e
to off
silence
UPS output off
(*)
configuration by function button
Button 2 is to deactivate or activate the
protection against deep battery discharges
as follows:
press button
button
down for 5s
2
5s
1 beep:
shutdown of
operation in
battery backup
after 1h30
2 beeps:
no shutdown
after 1h30
23