Front Panel - Expert E200407 Manual Del Usuario

FRONT PANEL

1. " LOAD " Button
2. 12V Battery lndicator
3. " GOOD " LED
4. " WEAK " LED
5. " BAD " LED
6. 6V Battery lndicator
7. " SET CCA " Button
8. Black Clamp
9. Red Clamp
OPERATING INSTRUCTION
Battery Load Test
This test evaluates a battery's ability to crank an engine. The tester draws
current from the battery while measuring its voltage level. The voltage
level of a good battery will remains relatively steady under load, but a de-
fective battery will show a rapid loss in voltage. Battery size (CCA rating)
and temperature will affect test result - follow instruction carefully.
1. Turn off the vehicle's engine, accessories and battery test equipment.
2. Connect the black clamp of the tester to the negative terminal of
the vehicle battery, and the red clamp of the tester to the positive
terminal of the vehicle battery. Ensure the connections are good.
3. Note the vehicle battery's CCA rating.
If the rating is not printed on the battery, use the following
guidelines to estimate battery size. Small ( 4 cyl ) 300 CCA;
Medium ( 6 cyl ) 400 CCA; Large ( 8 cyl ) 500 CCA.
4. Press the " SET CCA " button repeatedly and quickly until the CCA
value on the display matches the vehicle battery. If the 6V battery
indicator lights, the available CCA values for you to select from are
150, 200, 250, 300, 350, 400, 450, and 500.
If the 12V battery indicator lights, the available CCA values for you to
select from are 300, 400, 500, 600, 700, 800,900, and 1000.
NU-E200407_0715.indd 11 9/7/2015 10:44:30 AM