Chauvet DJ Line Dancer Guía De Referencia Rápida página 3

Overview
LED Display
Indicator LEDs
Menu Buttons
DMX In/Out
Safety Loop
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of Line Dancer products that you can power link at each voltage, see the User Manual or the
sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Line Dancer QRG Rev. 1
QUICK REFERENCE GUIDE
EN
Microphone
Sensitivity Knob
Power Out
Power In
Fuse Holder
2