Duramaxx 10028871 Manual De Instrucciones página 27

CAM-PW (Camera Power Button)
Before programming for the camera, be sure Main Power switch at ON position and camera is
not working for an event.
There are two modes that called LIVE VIEW and PREVIEW (PLAY-BACK) for operating the ca-
mera, once you press CAM-PW to switch ON the Camera, it always works at the default in LIVE
mode. Both the IN-USE will stay ON since camera is starting up. DC-PW small light on the right
top will alerts with red light for 2 seconds to show camera is PW ON already. But camera screen
is remaining dark until DISPLAY or PREVIEW
key is pressed. In this case, you can either change the setting of camera ,view pictures, take a
picture manually, download pictures to PC, or any operations which need camera to ON depend
on which mode you will select. When you do finish using the camera, remember to turn the
camera OFF by pressing the CAM-PW switch again.
During camera is ON mode manually, motion sensor will stop working until camera PW is turned
to OFF.
Navigator Disk / Function Keys / Menu Button (Description for Camera Operation Keys
which are in the upper portion of the inner panel):
Menu Button: The key in the centre is bring up the modes menu under CAMERA is ON manu-
ally. It is also used for accept a change after modification.
Navigator Disk: Four sides of disk represent for the Left / Right / Up / Down keys. The center
knob is the MENU button. All camera settings will be programmed with them. Press the MENU
to display the 2 titles of setting modes. Select a title that you wish to change by pressing the
left or right navigator key. Highlight your choice from an item list under the displaying title by
the Up or Down Key. Press the MENU to enter the option and change it with UP/DOWN keys.
And press OK to confirm. After finish a setting, quit to the main screen by pushing LEFT key.
Function Keys (Taking a Photo/ Video Manually)
Shot key: It is used for taking picture or video in LIVE mode and Play-Back media files in PRE-
VIEW mode. Push it to take a picture any time while camera is ON manually even TFT screen
remaining OFF (screen is always OFF by default) . For taking a video clip manually, 1st press
SHOT to start taking, a stop watch counter will work and press again to stop.
PIC/VIDEO key: It is a short-cut key for toggle switching between taking Picture or Video.
In the LIVE mode after turn ON camera manually, push this key to switch for other shot mode
instantly. Then, press OK to accept.
Display (LIVE) key: Press this key to wake up the screen for LIVE mode. Then press repea-
tedly to toggle on-screen information on/off.
Preview key: While camera is ON manually and press PREVIEW key, Camera will be switched
to Play-Back mode at once and show the last image. It is also a toggle button to skip between
27