What's In The Box; Preparing To Paint; Placement Options - Polk Audio Atrium 5c Manual Del Usuario

Altavoz para ambientes interiores y exteriores resistente a la intemperie de 70v o 100v para aplicaciones comerciales
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WHAT'S IN THE BOX

Please check to ensure you have everything in
your Polk Audio
®
Atrium
®
5c Loudspeaker.
Inside, you should find:
• Atrium5c Loudspeaker
• Speed-Lock Mounting Bracket
• Owner's Manual
• Online Registration Card

PLACEMENT OPTIONS

Atrium5c loudspeakers were created to live
and play outdoors. The Atrium5c has a wide
dispersion pattern and are also very efficient.
This means your Atrium5c will deliver excep-
tional sound quality throughout a large listening
area. However, if you want high sound levels in
an outdoor setting with acoustic characteristics
that differ from those of indoor conditions, we
recommend multiple-pair setups.
FIGURE 1: Place the speaker in a corner for more
bass output. Bracket attached to side wall.
FIGURE 3: Place the speaker close
under an eave for more bass output.
4
Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
FIGURE 2: Place the speaker away from eaves and
corners for less bass output.
FIGURE 4: The Atrium's built-in stability feet
ensure safe, secure placement on a shelf
of other flat surface.

PREPARING TO PAINT

Before you paint, you will need:
• A spray can of primer paint (Krylon
Sandable Spray Primer #1318).
• A spray can of the paint of your choice.
Choose exterior grade paint if you plan
to use the speakers outdoors.
• A paperclip or corkscrew (for removing
the paintable grille).
• Masking tape.
• Paint mask to cover unpaintable parts
(not included). To make an easy paint
mask, use the grille as a template
and cut a mask from heavy, nonporous
Kraft paper.
1. Separate the parts of the speaker: Remove
the brackets and bracket knobs. Remove
the grille by carefully hooking it with a bent
paper clip and pulling it gently away from
the cabinet [figure 5].
2. Mask off the binding posts on the back
of the speaker [figure 6], the end panels
and bracket knobs, and carefully mask
off the front of the speakers to protect
the drivers and baffles while painting
[figure 7]. The grille has a logo on it,
which you may mask off should you
choose not to paint over it.
Customer Service Hours of Operation: Monday-Friday, 9
FIGURE 5: Remove the grille using a paper clip.
FIGURE 6: Mask the binding posts
on the rear of the speaker.
FIGURE 7: Mask the drivers and baffles.
-5:30
polkcs@polkaudio.com
AM
PM EST
5

Publicidad

Tabla de contenido
loading

Tabla de contenido