Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
You may use any preferred grill utensils for placing and removing grilled food
(forks, tongs, etc.), but plastic kitchen utensils must not be used.
WARNING!
Never place plastic or other containers on the grill grid / heater,
as the high temperature may damage the grill grid / heater.
Control the water level in the dip tray while grilling. Never add water during the
grilling process, water may not be spilled on the hot grill grid / heater. Switch the
device off using the ON/OFF switch and leave the device to cool off. Before pouring
water into the dip tray, remove the control box from the device using its handle.
When you finish using the grill, set the temperature regulator knob to „0" position,
switch the ON/OFF switch to „O" position and disconnect the device from the power
supply.

6. Cleaning

WARNING!
Before cleaning, switch the device off using ON/OFF button,
disconnect it from the power supply.
Wait until the device has cooled off.
The device is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the device.
Cleaning of the device
o Before cleaning, leave the device to cool off.
o Remove the grilling remains from the grill grid / heater with the supplied
scrapper or sponge.
o Remove the dip tray, empty and clean it with a soft cloth or sponge with a mild
cleaning agent. Rinse the dip tray with clean water and then dry it thoroughly before
mounting it again in the device.
- 27 -

Publicidad

Tabla de contenido
loading

Tabla de contenido