Status Information - Luvion ESSENTIAL PLUS Manual De Instrucciones

22
1. If you want to add a new camera, please choose a free channel to add the camera.
Then select the add camera icon
selection (See Fig. 16).
The screen will show "Press the pairing button on the Baby unit" , at this time
please press and hold the
2. If you want to delete a paired camera, please choose the number of the
camera you want to delete, and then select delete camera icon
the camera (See Fig. 16).
3
. 5 Brightness Settings ( Brightness )
In this submenu you can adjust the brightness of the screen. See Fig. 17.
3
. 6 VOX Sensitivity ( VOX Sensitivity )
This submenu allows you to choose the VOX (voice activation) sensitivity level.
When the level set to high, the screen will be turned on by lower-softer sounds.
See Fig. 18.
4

Status Information

The status bar is displayed on the top of the screen. See Fig. 19.
1. Signal strength indicator
2. Camera number indicator
3. Temperature alert on/off indicator
4. Room temperature indicator
5. Zoom in indicator
6. Music indicator
7. Feed timer
8. Talkback indicator
9. Auto-switch indicator
10.Battery status/Charging indicator
and press the
camera power button for around 3 seconds.
button to confirm your
to delete