Care & Cleaning; Storage & Maintenance - Oster CKSTSK12S-TECO Guia Del Usuario

CARE & CLEANING
Your Titanium Infused DuraCeramic™ Skillet should be
cleaned after every use.
1. Turn the variable temperature control to Off. Unplug the skillet
and allow it to cool completely before cleaning.
NOTE: To protect the Titanium Infused DuraCeramic™ coating,
do not run cold water over cooking surface immediately after
use.
2. Remove variable temperature control probe. DO NOT IMMERSE
VARIABLE TEMPERATURE CONTROL PROBE, cord or plug in water
or any other liquid.
3. The skillet and the lid are HAND WASH ONLY. Wash with hot,
soapy water; skillet may be immersed in water. Rinse and dry
thoroughly.
4. DO NOT use steel wool or other metal pads as this may scratch
the surface.
NOTE: Never use abrasive cleaning agents to clean your
appliance as this may damage the surfaces.
5. Wipe the temperature control with a damp cloth and wipe dry.
CAUTION: The VARIABLE TEMPERATURE CONTROL PROBE must
always be completely dry before use.
10 www.oster.com
CKSTSK12S-TECO_17ESM2.indd 10-11
For proper care of your Titanium Infused DuraCeramic™
coated skillet, follow the following steps if stubborn stains
appear:
1. Sprinkle some baking soda on the stained area.
2. Add enough water to moisten the baking soda, making a paste
like texture.
3. Let sit for a few minutes (for tougher stains let sit up to an hour).
4. Lightly scrub with a plastic scouring pad or damp cloth and dry
thoroughly.
5. Repeat if necessary.
Should any stubborn stains appear, they will not affect the
performance and nonstick quality of the Titanium Infused
DuraCeramic™ coating.
STORAGE & MAINTENANCE
• Unplug unit and allow to cool. Never store unit while it is hot.
• Clean and thoroughly dry the skillet before storing.
• For convenience, the temperature control probe can be stored
inside the covered electric skillet.
• To avoid scratching the nonstick surface, place a paper towel into
the skillet.
www.oster.com
11
9/22/17 9:42 AM