Care And Cleaning - Oster CKSTPCECOV57 Manual De Instrucciones

TO CH A N G E A SE T T I N G
It's easy to switch functions during cooking.
Press the START/STOP button and then select the new desired cooking function. A
new timer will flash on the Display Screen, and the selected function will also flash.
Select the desired time, pressure, and/or temperature. Press the START/STOP
button and the new function will begin preheating.
To Change the Cooking Time:
You can change the cooking time before cooking begins by pressing the + and -
buttons before pressing START/STOP. Press and release to change slowly. Press
and hold to change time quickly. If you pass the desired temperature or time, press
the opposite button.
To Change the Temperature and Pressure:
You can change the temperature or pressure on certain pre-set functions before
cooking begins by pressing the TEMP/PRESSURE button before pressing START/
STOP. The Display Screen will illuminate TEMP or PRESSURE, depending on
which setting is being adjusted. The temperature may only be adjusted on the SLOW
COOK, YOGURT, BOIL, SIMMER, SAUTÉ and BROWN/SEAR
functions (see the Cooking Guide on page 16 for available adjustments).
CA RE A ND CL E A NI NG
Cleaning should only be carried out when the the
Oster Express Oval Max Pressure Cooker is cool and unplugged. Allow the Cooker
to completely cool before cleaning. Do not use the removable Cooking Pot on the
stovetop, inside a microwave oven or inside an oven. Use the pot only inside the
Oster Express Oval Max Pressure Cooker Heating Base. Wash the Sealing Gasket
and Lid by hand in warm, soapy water. Dry all parts thoroughly.
Cooking Pot:
When removing the Cooking Pot from the Heating Base, always use two hands
and lift directly upward. Failure to do so may result in scratching the outside of the
Cooking Pot (see Figure 6).
CKSTPCECOV57_22SEPM1 (LA).indd 23 CKSTPCECOV57_22SEPM1 (LA).indd 23
Figure 6
E ng lish-2 3
C A R E A N D C L EA N I N G ( C O N T. )
If food sticks or burns to the surface of the Cooking Pot, then fill it with hot soapy
water and let it soak before cleaning. Use a rubber or nylon spatula to remove
stubborn residue. If scouring is necessary, use a non-abrasive cleaner and a nylon
scouring pad or brush.
Although the Cooking Pot is dishwasher safe, we recommend hand-washing to
preserve the non-stick coating.
If white spots form on the surface of the Cooking Pot, then soak it in a solution of
vinegar or lemon juice and warm water for 30 minutes. Rinse and dry.
Note: Never use metal utensils or cleaning devices on the Cooking Pot, as this may
result in scratching and damage to the non-stick coating.
Exterior
Wipe the exterior of the Heating Base with a damp cloth and polish dry. DO NOT
use harsh abrasives, scourers or chemicals, as these will damage the surfaces. To
prevent damage to the Cooker do not use alkaline cleaning agents when cleaning.
Only use a soft cloth and mild detergent. Never immerse the Heating Base in water
or any other liquid.
Condensation Collector
Empty any collected water from the Condensation Collector (see Figure 3, page 7)
after each use. Wash in warm, soapy water.
Lid and Sealing Gasket
Always examine the gasket before each use. The silicone Sealing Gasket on the
inside of your Cooker Lid (see Figure 1, page 8) may deteriorate over time. Remove
Sealing Gasket for cleaning as needed. Hand-wash using warm, soapy water, dry
thoroughly, and replace Sealing Gasket in Lid before use. Ensure gasket is placed
properly by matching up the gasket tabs to the slots inside the lid. Ensure one flap
of gasket is tucked under the metal loops on both sides of the lid. Leave the Lid
upturned for storage, as this will also extend the life of the gasket. Sealing Gasket
may need to be replaced every 1 – 2 years depending on regular use. Contact Oster
customer service or visit www.osterlatinamerica.com to order replacement parts.
2022/6/22 10:01 AM 2022/6/22 10:01 AM CKSTPCECOV57_22SEPM1 (LA).indd 24 CKSTPCECOV57_22SEPM1 (LA).indd 24
210*140mm
E n glis h -2 4
2022/6/22 10:01 AM 2022/6/22 10:01 AM