Kohler Sterling 40202 Guia De Instalacion página 3

Scrape off the
old wax seal
1. Remove the Existing Toilet
Turn off the water supply.
Flush the toilet, then sponge out all remaining water from the
tank.
Disconnect the supply shut-off valve (if present), and remove the
old tank and bowl.
Remove the old wax seal from the floor with a putty knife.
Replace the old T-bolts with the new 5/16" diameter T-bolts.
CAUTION: Risk of hazardous gases. If the new toilet is not
installed immediately, temporarily stuff a rag in the closet flange.
Sterling
T-Bolts
Closet Flange
3 1035429-2-D