Klarstein 10030555 Manual Del Usuario página 29

Ocultar thumbs Ver también para 10030555:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4. If the default temperature and time is just your desired one, then press the button of "
work right now, and the symbol will light on brightly, timer will count down automatically.
5. After the cooking time runs out, ten beeps will ring to remind you the cooking process is done.
Important Notes
• This appliance equipped with micro switch inside (see graphic above "Product Description"). It won't work
if without pan inside (the panel will still light on but buttons no function); if taking out of the pan during
cooking process, the cooking process will be paused automatically, and need to press the button "
resume after return the pan into the appliance.
• During doing Steam function, you need to add some water into the pan and put a steam rack on it, then put
your food on a dish or directly onto the rack.
• Take care the hot steam when open the lid!
• If the water in the pan got dry during "Steam/Stew" function is running, it will automatically stop the pro-
cess to avoid any further overheating. Cool down first to resume it.
• If you just finished the mode of Stir-fry/Grill in temperature over 100°C, and want to change into Stew/
Steam function right away, the overheating protection will work on, the functions won't start and ten beeps
will ring. To do this, cool it first.
How to adjust the time (Work or Preset) and temperature
If you need to adjust the temperature and time you desired, then pls follow the below steps:
1. Press the "Set" button one time, the temperature numbers will flash; press two times, the symbol of "Work"
& time numbers will flash; press three times, the symbol of "Preset" & time numbers will flash;
2. During flash, press the "+" button to add the temperature and time you desire;
3. During flash, press the "—" button to reduce the temperature and time you desire;
4. After set the desired temperature and time, the relevant setting will flash in 5 seconds, then the settings will
be set and ready to start working.
5. Then press the button "
button "
" when you want to preset cooking time, as it will be activated automatically after the preset
time running out)
29
", it will start to cook as your desired temperature and time. (Do not press the
", it will start to
" to

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10030556

Tabla de contenido