Cleaning And Maintenance - H.Koenig OptiV8 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
Replacement of filter
Method: SIide water tank out from base unit, take the filter out from water tank, and then
replace with a new one. After new filter has been installed well into water tank, fill water
into water tank to Max fill level, and then slide water tank back into base unit. (Immerse
filter in water for several minutes in order to gain better performance in future use.
Anti-calc system
The filter is designed to reduce the buildup of limescale which occurs during steam
1.
ironing, this will prolong the working life of your iron. However, please note that the filter
will not completely stop the natural process of limescales build-up.
The filter should be replaced with a new one after two - three months. Before replace,
2.
the filter can still be used continuously. However, limescales may be most probably built up
in steam chamber, this happens always depending on your local water quality. 1 t is proposed
that replace filter as soon as possible or mix your water with 50% proportion of distilled
water.
Emptying and storing
Disconnect the appliance from the power supply and allow the appliance to cool down
1.
for 60 minutes at least.
After use, siide out the water tank and pour out all the remaining water.
2.
Wind the power cord around cord storage of the base unit.
3.
The iron should be place on the iron rest plate and they can store together.
4.

Cleaning and Maintenance

Unplug the appliance tram the main supply and let
1.
the iron cool down.
Clean the iron with a damp cloth.
2.
Wipe off scale and any other deposits on the soleplate
3.
with a damp cloth or non-abrasive (liquid) cleaner.
Never clean the appliance under the tap water.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido