HORIZON 24990 Instrucciones De Instalación página 5

3. Remove lower fascia – a.) using a Philips screwdriver, remove (2) screws located at each end of lower fascia, (1) per side. Using a flat head screwdriver, b.) remove
(5) plastic rivets from outside of that lower fascia and c.) remove (3) plastic push-pin rivets from inside-bottom edge of lower fascia. d.) On outside of lower fascia,
pull down on fascia clips to release the lower fascia from upper fascia while gently pulling outward.
a.)
b.)
d.)
c.)
©2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 21 24990NP 9-12-19 Rev. A