Publicidad
Idiomas disponibles
Idiomas disponibles
Quanti-Tray
English
Introduction
IDEXX Quanti-Tray* is designed to give quantitated bacterial counts of 100 mL samples using IDEXX reagent products. Add the
reagent/sample mixture to a Quanti-Tray, seal it in a Quanti-Tray* Sealer and incubate per the reagent instructions. Count the number
of positive wells and use the Most Probable Number (MPN) Table attached to determine the MPN.
Contents
This package contains sterile 51-well Quanti-Trays.
User Instructions
1. Use one hand to hold a Quanti-Tray
upright with the well side facing
the palm.
4. Pour the reagent/sample mixture
directly into the Quanti-Tray, avoiding
contact with the foil tab. Allow foam
to settle.
For technical support, please call:
North/South America: +1 207 556 4496 or +1 800 321 0207
Europe: +00800 4339 9111
UK: +44 01638 676800
China: +86 21 61279528
Japan: +81 422 71 5921
Australia: +1300 44 33 99
idexx.com/water
†
Download the IDEXX MPN generator software for automated Quanti-Tray results at idexx.com/mpngenerator.
* Quanti-Tray is a trademark or registered trademark of IDEXX Laboratories, Inc. in the United States and/or other countries.
© 2013 IDEXX Laboratories, Inc. All rights reserved.
art-06-02030-17_Quanti-TrayT.indd 3
*
2. Squeeze the upper part of the
Quanti-Tray so that the Quanti-Tray
bends toward the palm.
5. Place the sample-filled Quanti-Tray
onto the rubber tray carrier of the
Quanti-Tray Sealer with the well side
(plastic) of the Quanti-Tray facing
down to fit into the carrier.
3. Open the Quanti-Tray by pulling the
foil tab away from the well side. Avoid
touching the inside of the foil or tray.
6. Seal according to the Quanti-Tray
Sealer instructions.
7. Incubate according to reagent
instructions.
8. Count positive wells and refer to
the MPN table on the back of this
instruction sheet to find the MPN.
9. Dispose of media in accordance with
good laboratory practices.
Westbrook, Maine 04092 USA
†
One IDEXX Drive
3/14/14 11:26 AM
Publicidad
