Intended Use; Items Supplied; Technical Data; Noise And Vibration Information - Hilti SFC 18­A Manual Del Usuario

Belt hook (optional)
+
Release buttons with additional function
§
(charge status display activation)
Charge state and fault display (Li-ion
/
battery)

3.2 Intended use

The product described is a hand-held cordless drill / driver. It is designed to be used for driving and removing
screws and for drilling in steel, wood and plastic.
▶ Use this product only with Hilti Li­ion batteries of the B18 / B22 series.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.

3.3 Items supplied

Drill / driver, operating instructions.

4 Technical data

4.1 Technical data
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Speed in 1st gear
Speed in 2nd gear
Torque (max.)
Torque range (15 settings)

4.2 Noise and vibration information

Sound power level L
WA
Screwdriving without hammer action a
Uncertainty for screwdriving without hammer action (K)
Drilling in metal a
h,D
Uncertainty for screwdriving without hammer action
drilling in metal (K)
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock
is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
drill/driver are free from foreign objects.
4
Printed: 27.07.2016 | Doc-Nr: PUB / 5293248 / 000 / 00
h
2
SFC-18A SFC -A22
21.6 V 21.6 V
1.7 kg 1.7 kg
(3.7 lb) (3.7 lb)
0 /min ... 600 /min 0 /min ... 600 /min
0 /min ... 0 /min ...
1,800 /min 1,800 /min
28 Nm 28 Nm
1.5 Nm ... 10 Nm 1.5 Nm ... 10 Nm
SFC -A22
80 dB
1 m/s²
1.5 m/s²
21 m/s²
1.5 m/s²