Installing Windows - ASROCK X58 SuperComputer Manual Del Usuario

2.12.2 2.12.2 2.12.2

Installing Windows

Installing Windows Installing Windows
2.12.2 2.12.2 Installing Windows Installing Windows
W W W W Without RAID F ithout RAID F ithout RAID F ithout RAID Functions ithout RAID F
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [IDE].
STEP 2: Install Windows
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Install Windows
Insert the Windows ® Vista
your system, and follow the instruction to install Windows
on your system. When you see "Where do you want to install Windows?" page, please
insert the ASRock Support CD into your optical drive, and click the "Load Driver" button
on the left on the bottom to load the Intel
following path in our Support CD:
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
drive again to continue the installation.
3 4 3 4 3 4
3 4 3 4
ASRock X58 SuperComputer Motherboard
Vista Vista Vista
Vista Vista
®
unctions unctions unctions unctions
® TM TM
Vista / Vista 64-bit OS on your SATA / SATAII HDDs
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
TM / Vista TM 64-bit optical disk into the optical drive to boot
®
AHCI drivers. Intel
® Vista TM OS)
® TM
Vista 64-bit OS)
® TM TM
Vista / Vista
/ Vista / Vista / Vista 64-bit 64-bit 64-bit
/ Vista / Vista 64-bit 64-bit
TM TM TM TM TM TM TM TM TM TM
IDE Configuration.
IDE Configuration.
® Vista TM / Vista TM 64-bit OS
®
AHCI drivers are in the
64-bit optical disk into the optical