Installing Windows - ASROCK Fatal1ty Z68 Professional Gen3 Serie Manual Del Usuario

All manuals and user guides at all-guides.com
2.12 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
®

2.13 Installing Windows

64-bit / XP / XP 64-bit With RAID Functions
®
If you want to install Windows
bit on your SATA / SATAII / SATA3 HDDs with RAID functions, please refer to the
document at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.14 Installing Windows ®
/ XP 64-bit Without RAID Functions
®
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.14.1 Installing Windows
Functions
®
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE]. (For SATA3_0, SATA3_1, and SATA2_2 to
SATA2_5 ports.)
Set the option "SATA3 Mode" to [IDE]. (For SATA3_A1 to SATA3_A4 ports.)
®
STEP 2: Install Windows XP / XP 64-bit OS on your system.
Fatal1ty Z68 Professional Gen3 Series Motherboard
TM TM
7 / 7 64-bit / Vista / Vista
TM TM
7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-
TM TM
7 / 7 64-bit / Vista / Vista
TM TM
7 / 7 64-bit / Vista / Vista 64-bit / XP / XP 64-
®
XP / XP 64-bit Without RAID
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen SATA Confi guration.
64-bit / XP
45