Installing Windows - ASROCK ALiveN570SLI-eSATA2 Manual Del Usuario

All manuals and user guides at all-guides.com
2.15.2 2.15.2 2.15.2 2.15.2 2.15.2

Installing Windows

Installing Windows Installing Windows Installing Windows Installing Windows
RAID Functions RAID F RAID F unctions unctions unctions
RAID F RAID F unctions
®
If you want to install Windows
SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows ® Vista
system.
® TM
Insert the Windows Vista / Windows
to boot your system, and follow the instruction to install Windows
TM
Vista 64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the NVIDIA
drivers are in the following path in our Support CD:
.. \ I386 (For Windows ® Vista TM OS)
® TM
.. \ AMD64 (For Windows Vista
After that, please insert Windows
the optical drive again to continue the installation.
®
NOTE. If you install Windows Vista
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2 . 1 6 2 . 1 6 2 . 1 6 Untied Overclocking T 2 . 1 6 2 . 1 6 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup
to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate
under a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk
before you apply Untied Overclocking Technology.
ASRock ALiveN570SLI-eSATA2
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM TM TM TM TM TM
®
TM ® TM
Vista or Windows Vista 64-bit on your SATA /
Advanced screen IDE Configuration.
TM / Windows ® Vista TM 64-bit OS on your
® TM
Vista 64-bit optical disk into the optical drive
®
®
RAID drivers. NVIDIA
64-bit OS)
® Vista TM / Windows ® Vista TM 64-bit optical disk into
TM ® TM
/ Windows Vista 64-bit on IDE HDDs and want to
echnology echnology echnology echnology
Motherboard
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
Vista TM / Windows ®
®
RAID
3 3 3 3 3 3 3 3 3 3