Installing Windows - ASROCK P43R1600Twins Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Since Windows
vendor, RAID / AHCI functions are not supported under Windows
2.12.1
2.12.1
2.12.1
2.12.1
2.12.1

Installing Windows

Installing Windows
Installing Windows
Installing Windows
Installing Windows
W W W W Without RAID F
ithout RAID Functions
ithout RAID F
ithout RAID F
ithout RAID F
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
®
STEP 3: Install Windows
not supported.)
After making a SATA / SATAII driver diskette, you can start to install Windows
64-bit on your system. At the beginning of Windows
party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing
®
the Intel
AHCI driver. After reading the floppy disk, the driver will be presented. Select
the driver to install according to the mode you choose and the OS you install. You may
select: "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP)" for Windows
XP or "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP64)" for Windows
XP 64-bit.
®
2000 RAID / AHCI driver is not provided by the chipset
2000 / XP / XP 64-bit
2000 / XP / XP 64-bit
2000 / XP / XP 64-bit
2000 / XP / XP 64-bit
2000 / XP / XP 64-bit
®
unctions
unctions
unctions
unctions
®
2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
Advanced screen
XP / XP 64-bit OS on your system. (Windows
®
setup, press F6 to install a third-
ASRock Motherboard
®
2000.
IDE Configuration.
®
2000 is
®
XP / XP
®
®
2 9
2 9
2 9
2 9
2 9

Publicidad

Tabla de contenido
loading

Tabla de contenido