Inserting The Batteries - Carson Nano Racer Manual De Instrucciones

INSERTING THE BATTERIES

Attention
• Never mix used and new batteries.
• Never use batteries of different types together.
1
Open the battery compartment on the back of the transmitter.
CHARGE BATTERY PACK
Attention:
For charging the battery of the model, please use only the charger which is in delivery. Please pay attention for the notes in the manual.
Charging via transmitter:
Charging heads vary depending on the model
Turn the model and the transmitter off.
Charging via transmitter:
Open the Cover of the charging-port and put out the charging wire,
then put it into the interface of the model. The LED on the controller
Mode switch will turn on.
When the charging is completed, the LED will turn off.
GB // 10
2
Insert the batteries in the battery compartment.
Make sure that the polarity is correct.
Charging head
Charging Jack
BEC Charging head BEC Charging Jack