Intel Express 535T Guía De Inicio Rápido Y Del Usuario página 23

Control switch (530T)
Member switch 1 (535T)
Member switch 2 (535T)
Member switch 3 (535T)
Assemble a stack
To stack 535Ts with a 530T, you need to purchase a Stack Matrix Module
for the 530T.
1 Insert the Stack Matrix Module into the slot in the back of the 530T,
labeled Matrix Module, and tighten the screws.
2 Run a cable from the slot in the back of the 535T, labeled Stack
Interface Module, to the control switch's Stack Matrix Module, where
it reads "Switch 1." This connection makes this 535T switch Member 2
in the stack.
3 Repeat step 2 until you have added all member switches (535Ts) to the
stack. You can have a total of three member switches.
4 Power on the control switch.
Module A (Gigabit)
Stack Matrix Module
®
Intel Express 530T Matrix Module
Switch 1 Switch 2 Switch 3
Matrix Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
Connect to Matrix Module
Stack Interface Module
Stack Interface Module
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
009027390008
MAC Address
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
AC Input
100-240 VAC
50Hz-60Hz
1.5A max
21