Call Barring Service; Fixed Dial Number (Fdn); Change Codes - LG G5500 Guia Del Usuario

Settings
2
Once
]
Selecting Once puts the phone immediately in the lock state in
standby mode with the sliding keypad up.
]
To deactivate key lock, you should press the left soft key
[Unlock] plus star(*) key or slide the keypad down.

Call barring service

(Network dependent)
Call barring lets you restrict the making and receiving of calls with
your phone. For this function, you need the barring password,
which you can obtain from your service provider.
The following options are available:
]
All outgoing: No call can be made.
]
Outgoing international: International calls cannot be made.
]
Outgoing international except home country:
When abroad, calls can be made only to numbers within the
current country and to your home country, the country where
your home network provider is located.
]
All incoming: No call can be received.
]
Incoming when abroad: Calls cannot be received when you
are using your phone outside your home service area.
]
Cancel all barrings: All call barring settings are deactivated;
calls can be made and received normally.
]
Change password: Use this to set and change the call
barring password obtained from your service provider using this
option. You must enter the current password before you can
specify a new one. Once you have entered a new password,
you are asked to confirm it by entering it again.
Note
To use Call barring service, you must input the network
password. When calls are barred, calls may be possible to
certain emergency numbers on some networks.
82
(Menu 8.5.4)

Fixed dial number (FDN)

(SIM dependent) (Menu 8.5.5)
Use this to restrict your outgoing calls to selected phone numbers,
if this function is supported by your SIM card. The PIN2 code is
required.
The following options are available:
]
Activate: Use this to only call phone numbers saved in the
phonebook. You must enter your PIN2 code.
]
Cancel: Allows you to call any number.
]
Number list: Use this to view the numbers saved as fixed dial
numbers.
Note
Not all SIM cards have a PIN2. If your SIM card does not, this
menu option is not displayed.

Change codes

The Change codes feature lets you change your current
password to a new one. You must enter the current password
before you can specify a new one.
Use this to change the access codes: Security code,
PIN1 code, PIN2 code
Note
PIN: Personal Identification Number
Settings
(Menu 8.5.6)
83