Hubbell SNAPConnect Instrucciones De Instalación

GENERAL INFORMATION
1. CAUTION: RISK OF ELECTRIC SHOCK. Disconnect power before
installing. For installation by a qualified electrician in accordance
with national and local electrical codes.
2. CAUTION: USE COPPER CONDUCTORS ONLY.
3. Check that the device's type and rating are suitable for the
application.
WIRING INSTRUCTIONS
1. Connect the black lead wire on the terminal to the ungrounded
line conductor ("HOT" conductor, black).
2. Connect the white lead wire on the terminal to the grounded
line conductor ("Neutral" conductor, white).
3. Connect the green lead wire on the terminal to the grounding
conductor (green, green/yellow, bare).
4. Use UL Listed or CSA Certified wire connectors suitable for
copper wire only, installed per manufacturer's instructions.
5. Insert terminal into Hubbell SNAP Connect ™ series receptacle
and verify security.
6. Mount device in box and secure cover/wall plate.
PDS2489
Hubbell SNAP Connect ™
Receptacles And Terminals
Installation Instructions
Insert
Insérer
Insertar
PRINTED IN CHINA
Verify Security
S'assurer que le montage
est sécuritaire.
Verificar que la instalación
es segura.
11/11
English
®