Adding Effects - Kemper PROFILER STAGE Manual Del Usario

For metal sounds, we recommend adding one of the special noise
gate stomps, which are explained in the Main Manual. There is also
a tutorial video dedicated to the noise gates available on:
www.kemper-amps.com/video

ADDING EFFECTS

The PROFILER features eight effects modules. Four are located
before the amplifier module (pre), and four are located after it
(post). Modules A, B, C and D are pre amplifier and X, MOD, DLY
and REV are post amplifier.
» Hold the button of an empty effect module for a moment to
bring it into focus - e.g. module D.
» Turn the BROWSE knob to select one of the pre-installed
effect presets.
» Press to return to the home screen. Hold the button of
module D again to return to the edited module.
» Press the button of an effect module to activate or deactivate
the effect.
» Don't forget to store the edited Rig!
PROFILER STAGE QUICKSTART
<-- Category Auto Type Delete Preset Autoload
Category Type Preset
Delay Quad Harmonic Cae
Wah Wah Wah Cry
Shaper Wah Low Pass Dlp Hendrix
Distortion Wah High Pass Ibz Wh Ten
11