Morph Pedal - Kemper PROFILER STAGE Manual Del Usario

MORPH PEDAL

Morphing allows you to change any number of continuous
parameters like Gain level, Delay Mix or Delay Feedback
simultaneously - all with a single expression pedal. Moving
the pedal is equivalent to turning all those knobs at the same
time to move between one sound and another. We distinguish
between these two sounds with the terms "Base Sound" and
"Morph Sound". Here's a simple application:
The expression pedal used to control wah effects (as described in
the previous paragraph) is already primed to control Morphing as
well.
First, move the pedal to heel position. Turn the GAIN knob to
select the intended level for your Base Sound.
Move the pedal to toe position. Turn the GAIN knob and select the
intended level for your Morph Sound.
Now, your Morph Pedal changes the gain continuously between
the values associated with the Base and the Morph Sounds.
To continue, add the next continuous parameter you'd like to
morph. Don't forget to store the Rig to keep all the changes you've
made.
PROFILER STAGE QUICKSTART 15
GAIN
GAIN
GAIN