Kemper PROFILER STAGE Manual Del Usario página 21

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
SOFTWARE UPDATE VIA RIG MANAGER
To update your PROFILER with the latest software available,
simply connect it to your computer using a standard USB cable as
illustrated below.
Open Rig Manager and make sure that your PROFILER is switched
on. If software updates are available, Rig Manager will ask you for
permission to install them after a couple of minutes. The whole
procedure might take some time, initially.
SOFTWARE UPDATE VIA USB MEMORY STICK
» This update method requires you to prepare an empty USB memory stick, download software, and copy it over
to the stick.
» Connect the USB memory stick to your PROFILER.
» If the USB stick is already formatted, the top row of the display will show "USB Stick". Press the corresponding
soft button, select and execute "Format USB Stick". Once completed, you will be notified.
» If the USB stick is not formatted, the PROFILER will show "Are you sure? USB stick needs to be formatted".
Acknowledge the dialog with "Yes" and follow the onscreen instructions.
» Point your internet browser to: www.kemper-amps.com/start, choose "Updates", proceed to the downloads
section and select the category "Operating System Updates". Download the update and open the archive. Copy
the file "kaos.bin" from the archive to the "OS Updates" folder on your USB stick. Make sure that you read the
enclosed ReadMe as well as the Addendum Manual.
» Plug the USB stick into your PROFILER and an update dialog will appear shortly after. Acknowledge the update
and follow the onscreen instructions.
PROFILER STAGE QUICKSTART
21

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido