Blend; Output Jack; Adjustments; Torsion Rod - Peavey CIRRUS Serie Manual Del Usuario

B l e n d
The blend control (5) is offered for a wider variety of
sounds than available from conventional pickup selector
switches. It may be varied from the neck pickup (full
clockwise - CW) or any blend in-between.

Output Jack

The output jack is a genuine Switchcraft
jack which accepts standard guitar cables. (We recom-
mend high-quality Peavey shielded instrument cables).
* Switchcraft is a registered trademark of Switchcraft, Inc.
A
djustments
Your instrument has been carefully adjusted at the
Peavey factory for accurate intonation and playing
ease. However, your playing style and requirements
may necessitate additional adjustments. These should
be made by your authorized Peavey dealer, but with a
little care and by closely adhering to the following
instructions, you may attempt these adjustments yourself.
Please read the instructions thoroughly before
attempting any adjustments.

Torsion Rod

The neck is equipped with an a two
way steel torsion rod neck, should
neck adjustments be desired. While
the neck should need few adjust-
ments, neck relief (string clearance
over fingerboard) can be tailored to
your particular playing style or
string gauge. Adjustments can be
made by inserting the supplied
Allen wrench into the adjustment
6
* 1/4" phone
®