Application Of The Product And Intended Use; How To Replace The Battery - GERATHERM oxy control 4c Instrucciones De Uso

Application of the product and intended use

Geratherm
tended for spot-checking of oxygen saturation of arterial hemo-
globin (SpO2) and pulse rate of adult and pediatric patients in
hospitals, hospital-type facilities, and home environments. It is not
for continuous monitoring.
How to replpace the batteries
1. Lift the battery door cover shown
as the picture.
GB
2. Install two AAA batteries into the
battery compartment. Match the
plus (+) and minus (-) signs in the
compartment. If the polarities are
not matched, damage may be
caused to the oximeter.
3. Close the battery door cover.
Note: The pole orientation of the batteries must be as shown
in the In Figure, otherwise the device may be damaged.
Please insert or remove the batteries in the correct order, other-
wise the devices tab could be damaged.
Please remove the batteries if the oximeter is no longer in use.
If the battery status indicator lights up, replace the batteries in
time.
Warning: Do not dispose the battery in normal domestic
waste! Keep out of reach of young children. Do not dispose of the
battery in a fi re. It may explode.
pulse oximeter is a portable non-invasive device in-
®
AAA
AAA
22