9 OVEN INSTALLATION
Toggle Bolt
Mounting Plate
Space more
than wall
thickness
Wall
Figure 13
MOUNTING OVEN TO THE WALL
Two people are recommended to attach the Microwave Oven/
Hood to the Mounting Plate.
1. Thread the power supply cord through the hole made in
the bottom of the top cabinet.
2. Install the oven by tilting it forward and sliding it onto the
tabs of the Mounting Plate. Rotate the oven up so it rests
against the wall. See Figure 15.
3. Use the two Top Cabinet Screws and two Flat Washers,
supplied in the INSTALLATION HARDWARE, to attach
the unit to the top cabinet. See Figure 16.
4. Secure the bottom of the oven to the Mounting Plate
by using two Tapping Screws 4 x 8 mm from the
INSTALLATION HARDWARE. See Figure 16.
INSTALLATION INSTRUCTIONS
cont.
Toggle Nut
Figure 12
Figure 14
E6
Figure 15
Tapping Screw
Figure 16
Tapping Screw
Figure 17