Chauvet DJ INTIMIDATOR SPOT 260 Guía De Referencia Rápida página 3

To Begin
Unpack your Intimidator Spot 260 and make sure you have received all parts in good condition. If the box or contents
appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of Intimidator Spot 260 products that you can power link at each voltage, see the User Manual
or the specification sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Intimidator Spot 260 QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Notes.
Safety Cable
(such as CH-05 from
Chauvet)
Mounting Clamp
(such as CLP-15 from Chauvet)
Mounting Bracket
(Included)
Rubber Feet for
Floor Mounting
(x4)
EN
2