Amann Girrbach minimix Modo De Empleo página 9

Technical data:
L/B/H:
Weight:
Power supply:
Motor speed agitator:
Delivery rate:
Vacuum power:
Accessories/Components:
Order No.:
115680 Minimix stand
115620 Beaker with mixing blade 100 ml
115630 Beaker with mixing blade 250 ml
115640 Beaker with mixing blade 500 ml
115650 Beaker with mixing blade 750 ml
115660 Beaker with mixing blade 1000 ml
115631 Beaker 250 ml
115641 Beaker 500 ml
115651 Beaker 750 ml
115661 Beaker 1000 ml
115606 Spare filter, 5 pcs.
Packing list:
Order No.:
115690 wall mounting 230 V
(110/115V = 115670V115)
Minimix standard unit, excl. mixing
vessel, wall-mounted
1 Spare filter
1 Users' manual
1 Mains cable
1 Drilling template for wallmounting
4 Screws and rawp lugs for wallmounting
200 x 180 x 260 mm
10,5 kg
115/230 V, 50/60 Hz
-1
350 min
15 l/min
200 mbar
WARNINGS AND
!
SAFETY ASPECTS:
The Minimix was developed for use in dental labora-
tories. It must be installed and operated as described
in the user's manual. The manufacturer is not liable
for damage caused by using the unit for other pur-
poses or handling it incorrectly.
In addition, if the intended application is not listed
in the user's manual, the user is obliged to check
personally in advance that the unit is suitable for
this purpose.
_ Do not clean the Minimix with liquids containing
solvent!
_ Keep the lid and mixing vessel clean – especially
those areas which form a seal!
_ Do not allow the vacuum pump to idle for too
long (without a mixing vessel)!
_ The vacuum cannot be switched off until the
mixing time has elapsed!
_ Always hold the mixing vessel in your hand
when deactivating the vacuum!
_ Check if the (preliminary) filter is blocked. If
so, replace it to ensure that the vacuum is
attained continuously.
_ Never start mixing without having a mixing
bowl in position!
GB
9