Blackmagic Design Cinema Camera Manual De Instalación Y Funcionamiento página 10

Choose from HFS+ or exFAT formats. Confirm your
selection by tapping the 'yes, format my disk/card'
icon to continue, or 'cancel' to cancel the format
Preparing SD cards using your camera
1 Press the 'menu' button to open the dashboard, or to open the settings menu on
Blackmagic Micro Cinema Camera.
2 Select the 'format disk' or 'format card' icon using the navigation and 'ok' buttons on
the Blackmagic Pocket Cinema Camera. On Blackmagic Micro Cinema Camera, press
the 'right' arrow button to navigate through the settings and press the 'play' button to
select 'setup'>'card'.
3 Choose your format by selecting the HFS+ or exFAT icon.
4 A warning will appear asking you to confirm the format. Select 'yes, format my disk/
card' to continue, or 'cancel' to cancel the format.
5 A progress bar shows you the progress of the format. 'Complete' will appear when the
format is done. It is important not to remove SD cards while they are formatting.
6 Select the 'done' icon to return to the dashboard, or press the 'menu' button on
Blackmagic Micro Cinema Camera to return to the main menu settings.
Preparing SD cards on a Mac OS X computer
Use the 'disk utility' application included with Mac OS X to format or initialize your SD card in the
HFS+ or exFAT formats. If your SD card already has files recorded on it, remember to back up
your media as all data will be lost when it is formatted.
1 Plug an SD card into your computer's SD card slot or via an SD card reader.
2 Go to 'applications/utilities' and launch 'disk utility'.
3 Click on the disk icon of your SD card and then click the 'erase' tab.
About SD Cards 10 10