Using Autodesk Smoke - Blackmagic Design Cinema Camera Manual De Instalación Y Funcionamiento

3 Go to the Adobe Premiere Pro CC menu bar, select 'file/import' and choose the clips
you want to edit. Your clips will appear in the 'project' window.
4 Drag the first clip you wish to edit onto the 'new item' icon at the bottom right of the
'project' window. A new sequence will be created matching your clip settings.
You can now drag your clips onto the sequence timeline for editing.
Setting the project name and project options in Adobe Premiere Pro CC

Using Autodesk Smoke

To edit your clips using Autodesk Smoke 2013, create a new project matching the clips' video
format, bit depth, frame type and frame rate. For this example, clips were shot using ProRes 422
HQ 1080p25 camera settings.
1 Launch Smoke and the project and user settings window will appear. Click on the 'new'
button under the project heading.
2 The 'create new project' window will open. Name your project.
3 From the resolution dropdown menu, select 1920x1080 HD 1080.
4 Make sure bit depth is set to 10-bit and frame type is progressive.
5 From the config template dropdown menu select 1920x1080@25000p.cfg.
6 Leave the 'preferred format' set to ProRes 422 HQ and click 'create'.
7 Click on the 'new' button under the user heading.
8 When the 'create new user profile' window opens, type your user name and click 'create'.
9 When the project and user settings window reopens, click the start button.
10 From the menu bar, select 'file>import>file' and select your clips to import.
11 Once the clips appear in the media library you can drag your clips onto the timeline and
begin editing.
Post Production Workflow 62