Blackmagic Design Cinema Camera Manual De Instalación Y Funcionamiento página 24

The 'audio' settings on Blackmagic Micro Cinema Camera
Microphone Input
Microphone input adjusts the recording levels of the built in microphone. Move the audio slider
left or right to increase or decrease levels. Blackmagic Micro Cinema Camera and Blackmagic
Pocket Cinema Camera have built in stereo microphones that record to audio channels 1 and 2
when no external audio source is connected.
Input Levels
External audio connectors accept audio at microphone level or line level. It's important to select
'mic' or 'line' level audio as appropriate to avoid your external audio sounding almost inaudible
or too hot and distorted.
Set the external audio input levels by using the left and right arrow buttons on your camera.
Channel 1 Input
To increase or decrease levels for channel 1, move the audio slider icon left or right. If you're
using the Micro Cinema Camera, use the left and right arrow buttons on the camera.
The external audio input overrides the built in microphone and is recorded to audio channel 1.
Channel 2 uses Channel 1 Input
Select 'yes' if you only have channel 1 input and want to record the same external audio to
channels 1 and 2. You can leave this set to 'no' if you only want to record one channel of audio.
Channel 2 Input
To increase or decrease levels for channel 2, move the audio slider icon left or right. If you're
using the Micro Cinema Camera, use the left and right arrow buttons on the camera.
The external audio input overrides the built in microphone and is recorded to audio channel 2.
Headphone and Speaker Volume
When headphones are connected, a headphone icon will be displayed. When no headphones
are detected, a speaker icon will be displayed. Headphones will always be active when
recording or playing back, however speakers will only work when playing back. Move the
volume slider left or right to increase or decrease audio monitoring levels.
Menu Settings 24