SPORTSTECH VPX600 Manual Del Usuario página 36

A: If the belt is shifted to the right.
BELT ADJUSTMENT
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch and require
readjustment. To adjust the belt, turn on the main power switch of the treadmill and let the belt run at a speed of
8-10 KPH. Use the Allen Wrench provided to turn the rear roller adjustment bolts in order to centre the belt. If the
running belt is shifting to the left, turn the left adjustment bolt 1/4 turn clockwise,and the running belt should start to
correct itself.
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise, and the belt should
start to correct itself. Keep turning the adjustment bolts until the running belt is properly centered.
If the running belt is slipping during use, turn off and unplug the treadmill. Using the Allen Wrench provided, turn
both left and right rear roller adjustment bolts 1/4 turn clockwise,then turn the main power switch back on and run
the treadmill at a speed of 8-10 KPH. Run on to the running belt to determine if the belt is still slipping. Repeat this
procedure until the belt no longer slips.
LUBRICATION
Regular care and lubrication of the running surface guarantees a longer lifetime of the running surface and also
contributes significantly to your safety during training.
Maintenance Description
Simply drip a little bit of oil, using the practical dosing tube of the silicone oil bottle, into the existing red container.
For average use, repeat this process every one to two months. If you run many kilometers several times a week or if
several people use the treadmill regularly, you should fill the container more often with oil.
NOTE: Do not apply too much silicone oil. Excess oil should be wiped off.
Walk on the treadmill at a slow speed for 3 to 5 minutes to spread the silicone oil evenly.
Lubricant
1PC
Picture C: Lubricate the belt.
36
B: If the belt is shifted to the left.