Unpacking; Disposal Of The Packaging; Setup Location Requirements - Caso CB 2200 Manual Del Usuario

Batidora con función de cocinado
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
• Rubber spatula
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.3 Unpacking

To unpack the device, proceed as follows:
• Remove the device out of the carton and remove the packaging material.

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging materials
are selected in accordance with environmentally compatible and recycling-related points of
view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste.
Take any packaging materials that are no longer required to "Green Dot" recycling
collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.

13.5 Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:
• The appliance must be positioned on a solid, even, horizontal and heat-resistant base with
sufficient load-supporting capacity for the appliance itself plus the heaviest anticipated
cooking contents.
• Do not operate the appliance near wall or outlet to prevent damage from steam.
• Do not let cord hang over the edge of table or counter or touch hot surface.
• Choose the setup location in such a way that children cannot reach the device.
• The device is not intended to be installed in a wall or a built-in cupboard.
• Do not set up the device in a hot, wet or extremely damp environment or near flammable
material.
• The installation and assembly of this device in non-stationary setup locations (e.g. on ships)
must be carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
Caso Mixer mit Kochfunktion CB 2200
• Cleaning Brush
• Operating Instructions
37

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

2710

Tabla de contenido