Child Lock; Temperature Unit; Setting Time; Setting Day - Danfoss 088L5130 Manual Del Usuario

Ocultar thumbs Ver también para 088L5130:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Programmable Thermostats 088L5130/5132
Please note: Override mode is a temporary temperature setting
that is cancelled automatically by the next event in the scheduled
4-event program.
OVERRIDE
MODE

Child Lock

I want to lock the thermostat menus to prevent the
settings from being changed.
To do so, you must activate the child lock:
1
Press the OK button twice to activate the menu.
2
Press the Up or Down buttons until the Settings option fl ashes.
3
Press the OK button.
4
Press the Up or Down buttons until the Childlock option
fl ashes. A padlock symbol will appear in the menu area and Off
will fl ash in the upper part of the display.
5
Press the Up or Down buttons until On fl ashes.
6
Press the OK button.
7
Select Exit to exit the option.
To unlock the child lock again, proceed as follows:
1
Press the OK button to activate the menu.
2
Then press and hold the Up and Down buttons simultaneously
for three seconds.
Factory setting: Celsius
CHILDLOCK
SETTINGS

Temperature Unit

I want to change the temperature unit (
the display.
To do so, you must:
1
Press the OK button twice to activate the menu.
2
Press the Up or Down buttons until the Settings option fl ashes.
3
Press the OK button.
4
Press the Up or Down buttons until °C/°F fl ashes in the menu
area. The unit currently selected will fl ash in the upper part of
the display.
5
Press the Up or Down buttons until the required unit °C/°F
fl ashes.
6
Press the OK button.
7
Select Exit to exit the option.
Please note: Temperatures are displayed in Celsius with a resolution
of 0.5 degree and in Fahrenheit with a resolution of 1 degree.
4
Factory setting: OFF

Setting Time

I want to change the time.
To do so, you must:
1
Press the OK button twice to activate the menu.
2
Press the Up or Down buttons until the Settings option fl ashes.
3
Press the OK button.
4
Press the Up or Down buttons until the Time option fl ashes.
The currently selected 12 or 24 hour clock will fl ash in the lower
part of the display.
5
Press the Up or Down buttons to select either 12 or 24 hour clock.
6
Press the OK button. The hour will begin fl ashing in the lower
part of the display.
7
Press the Up or Down buttons to set the hour.
8
Press the OK button. Now the minutes will fl ash.
9
Press the Up or Down buttons to set the minutes.
10
Press the OK button.
11
Select Exit to exit the option.
Factory setting: 24 hour clock
used in
°C/°F)

Setting Day

I want to change the day of the week.
To do so, you must:
1
Press the OK button twice to activate the menu.
2
Press the Up or Down buttons until the Settings option fl ashes.
3
Press the OK button.
4
Press the Up or Down buttons until the Day option fl ashes.
The currently selected day of the week will fl ash in the lower
part of the display.
5
Press the Up or Down buttons until the required day of the
week fl ashes.
6
Press the OK button.
7
Select Exit to exit the option.
© 2009 Danfoss Inc.
SETTINGS
C°/F°
TIME
SETTINGS
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

088l5132

Tabla de contenido