1. Side Shields
Your loupe is equipped with side shields to protect your eyes from
backsplash. To attach side shields, simply push the two tabs on the
top of each shield into the notches on the bottom of each temple arm.
2. Lens Cap Covers
Brasseler USA provides lens cap covers for your loupes. These covers
are designed to protect the lens from scratches or damage during air
abrasion procedures.
3. Flip Grip (only included with flip-up loupes)
OPERATING INSTRUCTIONS
Accessories
The flip grips included with your flip-up
loupes allow you to lift the loupes from
your field of vision without contaminating
your gloves or instruments.
Rinse under fast-running water to remove gross
debris. Disinfect using either a quaternary
ammonium disinfectant such as CaviCide®, or a
phenol alcohol-based spray such as Lysol® brand
disinfectant. Follow the label directions.*
*CaviCide and Lysol are not registered trademarks of Brasseler USA
5