C - iNSTALLATiON
If your camera is not equipped with the WPS feature or you do not want to use it, you will have to use a
wired connection for setup, even if you subsequently intend to use a WiFi connection.
Modem/router
connected to
the internet
IMPORTANT: Do not connect your camera to your computer. This will not provide it with access to the
internet.
In most cases, the camera is immediately detected by the modem/router, which grants it access to the
Internet. After a few seconds, the network activity LED at the back of the camera should flash.
3 - FOCUSSING THE IMAGE
• Once you have set up the device, you can adjust the focus of the image if it is lacking sharpness.
Gently rotate the lens to adjust the focus.
WARNING: Do not unscrew the lens completely or force it.
8
EN
720P HD WiFi iP Camera
Reset
WPS
camera
Reset
WPS
Mains adapter
Power
Wireless
Power
Wireless