Mounting Module To The P42, P43 And P44 Displays - AB Quality 2706-PENET1 Instrucciones De Instalación

Mounting Module to the P42, P43 and P44 Displays

The InView Ethernet TCP/IP module is designed to mount to the track of the
InView P42, P43 and P44 displays. The back plate of the module has tabs for
attaching to the track. Tighten mounting screws until they bottom out against the
back plate.
Power Line
Back Plate
with Tabs
InView Ethernet TCP/IP Module
Serial Cable
For ease in mounting, rotate
module 90° so that the mounting
holes are on top and bottom.
Rotate the module clockwise over
track until the alignment is
horizontal.
Publication 2706-IN008D-EN-P - October 2003
7