Maintenance And Care - Blaupunkt BP2000D Guía De Seguridad

Cooling down
• The nozzle and accessory become very hot during use. Let them cool down before attempting to move or store the tool.
• To reduce the cooling time, switch the tool on at the position I setting and let it run for a minute.
• Switch the tool off and let it cool down for at least 30 minutes.

Maintenance and Care

Your Power Tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning
• Keep the ventilation slots of the machine clean to prevent overheating of this tool.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come off use a soft cloth moistened with soapy water.Never use solvents such as petrol, alcohol, ammonia
water, etc. These solvents may damage the plastic parts.
Product Speci cations
Rated Voltage/Frequency
Power
Speeds
Operating Temperature
Airflow Speed
20V ~ 50Hz
2000W
2
330 - 510 ºC
300 – 450 l/min