Signs Present On The Machine And Their Meaning; Machine Control - IRTEC G/F8 Manual D’instruccion De Utilizo Y Manutencion

SIGNS PRESENT ON THE MACHINE AND THEIR MEANING

1) This sign indicates the operations and parts
that may be risky for the safety of the operator.
When seeing this sign read carefully the mes-
sage which follows and beware of possible risk
of accident.
2) This sign indicates pressurized supply lines.
Do not release the clamps before making sure
that the pressure is released.
3) This sign indicates dangerous equipment in
operation. Never use this machine with safety
guards removed. When using a draw bar to pull
in the hose use only protected shafts, conform-
ing with the safety standards in force.
4) This sign indicates machine with autmatic
start with moving parts.
Stay away during the operation.
1) Gearbox lever (fig.1 pos.1)
2) Gearbox idle lever and emergency stop (fig.1 pos.2)
Fig.2
5) Hand hydraulic pump for feet control (fig.3)
Fig.4
7) Computer system for irrigation programming (fig.5) OPTIONAL
CAUTION
MACHINE CONTROLS
1
3) Automatic stopping hook (fig.2 pos.1)
4) Hydraulic anchor feet (fig.2 pos.2)
2
6) Spool valve for hydraulic control system (fig.4) OPTIONAL
5) This sign indicates a risk of electric power
danger.
Never position the rain gun trolley
close to power lines or power packs. Make
sure that the sprinkled water does not contact
any power lines, houses, roads or any working
sites.
6) Before operating the machine read the in-
struction manual carefully.
7) Before servicing or making any adjust-
ments stop the machine and disconnect the
supply line.
1
2
Fig.1
Fig.3
Fig.5
GB
13