Vacuum-Sealing With The Vc 100 And Vc 200 - Caso DESIGN 1260 Manual De Usuario Original

3. Please turn the button on top of the lid of the container to the position
SEAL.
4. Press the vacuum-sealing button. Ensure the lid is tightly sealed by pushing it down with
your hand. The machine then performs the vacuum-sealing process and switches off
automatically once the operation is complete.
5. Remove the connecting hose from your appliance.
6. To open the vacuum-sealer container, turn the knob on the lid to OPEN; you should
then hear the noise of the air flowing into the container.
7. This noise guarantees that the contents have been vacuum-sealed.

14 Vacuum-sealing with the VC 100 and VC 200

1. Fold down the lid of the appliance and then connect the container set's hose connector
to the connection piece of your appliance (top left) using the connecting hose of your
appliance.
2. Fill the containers and leave a space of at least 3 cm from the top edge; put on the lid.
3. Please turn the button on top of the lid of the container to the position
SEAL.
4. Switch on the vacuum sealer. Press the "Container Vacuum" (Behälter Vakuum) button.
5. Ensure the lid is tightly sealed by pushing it down with your hand. The machine then
performs the vacuum-sealing process and switches off automatically once the operation
is complete.
6. Remove the connecting hose from your appliance.
7. To open the vacuum-sealer container, turn the knob on the lid to OPEN; you should
then hear the noise of the air flowing into the container.
8. This noise guarantees that the contents have been vacuum-sealed.
17