Troubleshooting - Klarstein 10032101 Manual De Instrucciones

• Wipe the appliance and the inside of the housing using a damp cloth.
• Other parts used can be cleaned in warm dishwater. Cleaning the bread or cake
forms or the stirring tools in a dishwasher is not recommended. In addition, the
ceramic coating is very sensitive to strongly acidic cleaning agents.
• Allow time for the appliance to dry completely.
Replacing the lid
After cleaning, replace the lid (image E2). Hold the lid
upright and push the latches of the lid into the recesses in the
housing (see markings).

TROUBLESHOOTING

Error Codes
Fault Possible Cause
E00 Appliance is too cold.
E01 Appliance is still too warm af- ter the
last baking programme.
EEE Temperature sensor open.
HHH Short-circuit in temperature sensor.
If you are unable to identify or solve the problem, contact your local Service centre.
Before telephoning, make a note of the model, serial number and purchase date of
your machine, the Servie Center will require this information.
Suggested Solution
Wait until the appliance has
reached room tem- perature.
Wait until the appliance has cooled
down.
Call customer service.
Call customer service.
EN
33