Usb Operation; Repeat Play; Bluetooth Operation - Trevi XF 700 Guia Del Usuario

ENGLISH
3. Press the P-MODE/MEM button (23) to finish saving the station (e.g., P01 is now set to 93.1MHz).
4. To save another station, repeat steps 1 to 3. You may save up to 50 FM stations

USB OPERATION

This PA System provides one USB port for music playback.
1. Press the FUNCTION button (19) on unit to select "USB" mode.
2. Connect the USB memory stick to the USB port (20). Playback will start automatically from Track 1.
3. To pause playback, press the /SCAN button (11) on unit. The current track No. and "P" will show on the display.
4. To resume playback, press the /SCAN button (11) again.
5. To select a desired track, press the :(18) or 9(17) button respectively during playing until the desired track appears on the
display. The unit will start play automatically.
6. To search for a particular passage during playback, press and hold the :(18) or 9(17) button to scan the current playing
track at high speed until desired point (passage) appears, then release the button for normal playback mode.
7. To select a song which track number exceeds 10, press the +FOLD/+10/M. button (16) or -FOLD/-10/M. button (24) each
time to skip forward/backward 10 tracks, then press the :(18) or 9(17) button to select desired track.
8. To select a desired folder (if the USB contains more than one folder), press and hold the +FOLD/+10/M. button (16) or -FOLD/-
10/M. button (24) each time to skip forward/backward a folder, then press the :(18) or 9(17) button to select desired track.
Important: The USB port is intended for data transfer only, other devices cannot be used with this USB connection. The use of
USB extension cords is not recommended.

REPEAT PLAY

You can play one track or all tracks on the USB repeatedly.
TO REPEAT A SINGLE TRACK
1. Press P-MODE/MEM button (23) on unit during play, the display will show "
over again till you press the/SCAN button (11) on unit.
2. To cancel repeat play, press P-MODE/MEM button (23) on unit until "
TO REPEAT ALL THE TRACKS
1. Press P-MODE/MEM button (23) on unit until the "
over and over again till you press the/SCAN button (11) on unit.
2. To cancel repeat play, press the P-MODE/MEM button on unit until "
TO REPEAT THE FOLDER (ONLY FOR USB WHICH CONTAINS MORE THAT ONE FOLDER)
1. Press the P-MODE/MEM button (23) on unit until "
repeated over and over again till you press the /SCAN button (11) on unit.
2. To cancel repeat play, press the P-MODE/MEM button (23) on unit until "
RANDOM PLAY
Press the P-MODE/MEM button (23) on unit in play mode till the "RAND" shows steadily on the display, the random play will start
from next track automatically, until all tracks are played over and then it will stop. Press the P-MODE/MEM (23) button on unit again
until the "RAND" disappears from the display to cancel.
NOTES
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.

BLUETOOTH OPERATION

1. Press the FUNCTION button (19) on unit to switch to BT function, the LCD will display "bt" and the pair indicator (2) will flash
at high speed.
2. Turn on the Bluetooth function on the device, scan the unit "XF 700" and connect, then input the password 0000 if required,
the pair indicator (2) keep light up to indicate connection done, and the display will show "bt". Press Play to start playback.
3. Rotate the VOLUME knob (7) on the unit or adjust the volume on the external device to increase or decrease the music volume
to your desired level.
4. Press and hold the PAIR button (10) to disconnect Bluetooth.
Note: The Bluetooth works best within 10 meters.
" and the current track will be played over an
" disappears from the display.
" shows steadily on the display, all tracks on the USB will be played
" disappears from the display.
FOLDER " show steadily on the display, the current folder will be
FOLDER" disappears from the display.
8
XF 700